WL-3型皮帶輪拉絲裝置

 WL-3 type pulley wire drawing unit

一、 Technical parameters, 6.5mm, 4.4mm-4.1mm.

The outlet speed is 150m-170m,4.4mm-4.1mm per minute per hour, the theoretical output is about 1000kg, and the installed power is 55.5kw frequency conversion. Overall size of the main engine, 3.6m long, 1.35m wide, 2.25m high, and weight of about 2.1 tons.

Two; the configuration list! Adopt heavy three-axis reducer, the pulley adopts B-type with three grooves, (using three-force triangle belt), all using the diameter of 500mm inlaid alloy drum, the finished drum diameter of 600mm inlaid alloy, using the new national standard motor, 18.5kw6 class 1,18.5kw4 class 2. Crane motor of 1.5 kkW class 4, one set of 22 kW frequency conversion electric cabinet (brand Anhui Langge), one set of unloading line crane, one set of mold hanging head, 3 sets of forced mold box, the frame is welded with 90mm angle steel, guide bar is welded with 80mm thickened square pipe, panel thickness of 2.0mm, motor frame is welded by 80mm thickened groove steel, and 1 unpowered stripping machine. Install the motor shield. Note: The voltage is 380V-50 HZ

III; Auxiliary equipment;

1-8 press 2500 yuan

A Type 10 butt welding machine is 1500 yuan

Car a 500 yuan auxiliary equipment total 4500 yuan, 5100 yuan after tax

 Note: Motor, reducer, alloy drum, frequency converter, warranty for one year, except vulnerable parts, artificial damage.

Note: The quotation does not include freight, reducer gear oil, wire and cable, tools and technicians.

Note: it is suggested to match the mold model;

（6.1mm-5.7mm）-5.0mm-4.4mm

（6.1mm-5.6mm）-4.8mm-4.1mm。

Anping County Taihuang Silk mesh Machinery Co., LTD

Tel.; 0318-7750456

Fax; 0318-7963335

mobiles phones; 13180012577-1530381036 

WL-3型皮帶輪拉絲裝置

一、技術參數：6.5 mm、4.4 mm—4.1mm

出口速度為150米-170米，每分鍾4.4毫米-4.1毫米，理論輸出約為1000公斤，安裝功率為55.5千瓦變頻器。主發動機整體尺寸為3.6米長，1.35米寬，2.25米高，重量約2.1噸。

二；配置列表！采用重型三軸減速器，皮帶輪采用B型帶三槽，（采用三力三角帶），全部采用直徑500mm的鑲嵌合金滾筒，成品滾筒直徑600mm鑲嵌合金，采用新國標電機，18.5kw6級，11.85kw4級。1.5千瓦4級起重機電機，22千瓦變頻電櫃（安徽朗格品牌），1台卸料線起重機，1台模具吊頭，3台模具強迫箱，機架采用90毫米角鋼焊接，導杆采用80毫米厚方管焊接，麵板厚度為2.0毫米，機架用80毫米厚的槽鋼焊接；無動力剝線機1台。安裝電機保護罩。注:電壓為380V—50HZ

注:電機、減速器、合金滾筒、變頻器，保修一年，易損件除外，人為損壞。

注:報價不含運費、減速器齒輪油、電線電纜、工具和技術人員。

注:建議與模具型號相匹配；

(6.1mm-5.7mm)-5.0mm-4.4mm

(6.1mm-5.6mm)-4.8mm-4.1mm.

安平縣泰煌絲網機械有限公司

電話:0318-7750456

傳真；0318—7963335

移動電話；